Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 210 / 1232

210 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
6
Root (:) Commands
:PWRRegister[:EVENt] (Power Event Event Register)
(see page 1088 )
Query Syntax
:PWRRegister[:EVENt]?
The :PWRRegister[:EVENt]? query returns the integer value contained in
the Power Event Event Register and clears the register.
Return Format
<value><NL>
<value> ::= integer in NR1 format.
See Also
• "Introduction to Root (:) Commands" on page 182
• ":CHANnel<n>:PROTection" on page 268
• ":OPEE (Operation Status Enable Register)" on page 197
• ":OPERegister:CONDition (Operation Status Condition Register)" on
page 199
• ":OVLenable (Overload Event Enable Register)" on page 203
• ":OVLRegister (Overload Event Register)" on page 205
• "*STB (Read Status Byte)" on page 174
• "*SRE (Service Request Enable)" on page 172
Table 77 Power Event Event Register
Bit Name Description When Set (1 = High = True), Indicates:
15-3 --- --- (Not used.)
2 Deskew Deskew Complete Power analysis deskew is complete.
1 Apply Apply Complete Power analysis apply feature is complete.
0 Setup Setup Complete Power analysis auto setup feature is complete.
To PWR bit in
Operation Status
Condition Register
+
OR
:PWRenable
:PWRenable?
Power Event Enable (Mask) Register
1 0 2 3 4 5 6 7 9 8 10 11 12 13 14 15
:PWRRegister[:EVENt]?
Power Event Event Register
Apply
Setup
Deskew