Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 309 / 1232

:FUNCtion Commands
15
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 309
:FUNCtion:OPERation
<operation> (see
page 331 )
:FUNCtion:OPERation?
(see page 332 )
<operation> ::= {ADD | SUBTract |
MULTiply | INTegrate | DIFF | FFT
| SQRT | MAGNify | ABSolute |
SQUare | LN | LOG | EXP | TEN |
LOWPass | HIGHpass | DIVide |
LINear | TRENd | BTIMing |
BSTate}
:FUNCtion:RANGe
<range> (see
page 333 )
:FUNCtion:RANGe? (see
page 333 )
<range> ::= the full-scale
vertical axis value in NR3
format.
The range for ADD, SUBT, MULT is
8E-6 to 800E+3. The range for the
INTegrate function is 8E-9 to
400E+3.
The range for the DIFF function
is 80E-3 to 8.0E12 (depends on
current sweep speed).
The range for the FFT function is
8 to 800 dBV.
:FUNCtion:REFerence
<level> (see
page 334 )
:FUNCtion:REFerence?
(see page 334 )
<level> ::= the value at center
screen in NR3 format.
The range of legal values is
+/-10 times the current
sensitivity of the selected
function.
:FUNCtion:SCALe
<scale
value>[<suffix>] (see
page 335 )
:FUNCtion:SCALe? (see
page 335 )
<scale value> ::= integer in NR1
format
<suffix> ::= {V | dB}
:FUNCtion:SOURce1
<source> (see
page 336 )
:FUNCtion:SOURce1?
(see page 336 )
<source> ::= {CHANnel<n> | GOFT |
BUS<m>}
<n> ::= {1 | 2 | 3 | 4} for 4ch
models
<n> ::= {1 | 2} for 2ch models
<m> ::= {1 | 2}
GOFT is only for FFT, INTegrate,
DIFF, and SQRT operations.
Table 86 :FUNCtion Commands Summary (continued)
Command Query Options and Query Returns