Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 589 / 1232

:SAVE Commands
25
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 589
:SAVE:WAVeform:FORMat
(see page 1088 )
Command Syntax
:SAVE:WAVeform:FORMat <format>
<format> ::= {ALB | ASCiixy | CSV | BINary}
The :SAVE:WAVeform:FORMat command sets the waveform data format
type:
• ALB — creates an Agilent module binary format file. These files can be
viewed offline by the
Agilent Logic Analyzer application software. The
proper file extension for this format is ".alb".
• ASCiixy — creates comma- separated value files for each analog channel
that is displayed (turned on). The proper file extension for this format
is ".csv".
• CSV — creates one comma- separated value file that contains
information for all analog channels that are displayed (turned on). The
proper file extension for this format is ".csv".
• BINary — creates an oscilloscope binary data format file. See the User's
Guide for a description of this format. The proper file extension for this
format is ".bin".
Query Syntax
:SAVE:WAVeform:FORMat?
The :SAVE:WAVeform:FORMat? query returns the selected waveform data
format type.
Return Format
<format><NL>
<format> ::= {ALB | ASC | CSV | BIN | NONE}
When NONE is returned, it indicates that an image file format is currently
selected.
See Also
• "Introduction to :SAVE Commands" on page 575
• ":SAVE:WAVeform[:STARt]" on page 588
• ":SAVE:WAVeform:LENGth" on page 590
• ":SAVE:IMAGe:FORMat" on page 580