Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 859 / 1232

:TRIGger Commands
30
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 859
:TRIGger:DELay:TRIGger:SLOPe
(see page 1088 )
Command Syntax
:TRIGger:DELay:TRIGger:SLOPe <slope>
<slope> ::= {NEGative | POSitive}
The :TRIGger:DELay:TRIGger:SLOPe command specifies rising (POSitive) or
falling (NEGative) for the trigger edge in the Edge Then Edge triggger.
Query Syntax
:TRIGger:DELay:TRIGger:SLOPe?
The :TRIGger:DELay:TRIGger:SLOPe? query returns the current trigger edge
slope setting.
Return Format
<slope><NL>
<slope> ::= {NEG | POS}
See Also
• "Introduction to :TRIGger Commands" on page 843
• ":TRIGger:DELay:TRIGger:SOURce" on page 860
• ":TRIGger:DELay:TDELay:TIME" on page 857
• ":TRIGger:DELay:TRIGger:COUNt" on page 858