Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 240 / 1232

240 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
8
:BUS<n> Commands
:BUS<n>:LABel
(see page 1088 )
Command Syntax
:BUS<n>:LABel <quoted_string>
<quoted_string> ::= any series of 10 or less characters as a
quoted ASCII string.
<n> ::= An integer, 1 or 2, is attached as a suffix to BUS
and defines the bus that is affected by the command.
The :BUS<n>:LABel command sets the bus label to the quoted string.
Setting a label for a bus will also result in the name being added to the
label list.
Query Syntax
:BUS<n>:LABel?
The :BUS<n>:LABel? query returns the name of the specified bus.
Return Format
<quoted_string><NL>
<quoted_string> ::= any series of 10 or less characters as a
quoted ASCII string.
See Also • "Introduction to :BUS<n> Commands" on page 234
• ":BUS<n>:BIT<m>" on page 235
• ":BUS<n>:BITS" on page 236
• ":BUS<n>:CLEar" on page 238
• ":BUS<n>:DISPlay" on page 239
• ":BUS<n>:MASK" on page 241
• ":CHANnel<n>:LABel" on page 261
• ":DISPlay:LABList" on page 298
• ":DIGital<d>:LABel" on page 284
Example Code
' Set the bus 1 label to "Data":
myScope.WriteString ":BUS1:LABel 'Data'"
N O T E
This command is only valid for the MSO models.
N O T E
Label strings are 10 characters or less, and may contain any commonly used ASCII
characters. Labels with more than 10 characters are truncated to 10 characters.