Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 507 / 1232

s 1
507
Agilent InfiniiVision 3000 X-Series Oscilloscopes
Programmer's Guide
23
:POWer Commands
These :POWer commands are available when the DSOX3PWR power
measurements and analysis application is licensed and enabled.
Table 94 :POWer Commands Summary
Command Query Options and Query Returns
:POWer:DESKew (see
page 511 )
n/a n/a
:POWer:EFFiciency:APP
Ly (see page 512 )
n/a n/a
:POWer:ENABle {{0 |
OFF} | {1 | ON}} (see
page 513 )
:POWer:ENABle? (see
page 513 )
{0 | 1}
:POWer:HARMonics:APPL
y (see page 514 )
n/a n/a
n/a :POWer:HARMonics:DATA
? (see page 515 )
<binary_block> ::=
comma-separated data with
newlines at the end of each row
:POWer:HARMonics:DISP
lay <display> (see
page 516 )
:POWer:HARMonics:DISP
lay? (see page 516 )
<display> ::= {TABLe | BAR | OFF}
n/a :POWer:HARMonics:FAIL
count? (see page 517 )
<count> ::= integer in NR1 format
:POWer:HARMonics:LINE
<frequency> (see
page 518 )
:POWer:HARMonics:LINE
? (see page 518 )
<frequency> ::= {F50 | F60 |
F400}
n/a :POWer:HARMonics:POWe
rfactor? (see
page 519 )
<value> ::= Class C power factor
in NR3 format
n/a :POWer:HARMonics:RUNC
ount? (see page 520 )
<count> ::= integer in NR1 format
:POWer:HARMonics:STAN
dard <class> (see
page 521 )
:POWer:HARMonics:STAN
dard? (see page 521 )
<class> ::= {A | B | C | D}