Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 546 / 1232

546 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
23
:POWer Commands
:POWer:SIGNals:VMAXimum
(see page 1088 )
Command Syntax
:POWer:SIGNals:VMAXimum <value>[suffix]
<value> ::= Maximum expected input Voltage in NR3 format
[suffix] ::= {V | mV}
The :POWer:SIGNals:VMAXimum command specifies the maximum expected
input voltage. This value is used to set the vertical scale of the channel
probing voltage.
This command is available for the Inrush Current and Turn On/Off Time
types of power analysis.
Query Syntax
:POWer:SIGNals:VMAXimum?
The :POWer:SIGNals:VMAXimum query returns the expected maximum
input voltage setting.
Return Format
<value><NL>
<value> ::= Maximum expected input Voltage in NR3 format
See Also
• ":POWer:INRush:APPLy" on page 524
• ":POWer:ONOFf:APPLy" on page 530
• ":POWer:SIGNals:AUTosetup" on page 541
• ":POWer:SIGNals:CYCLes" on page 542
• ":POWer:SIGNals:DURation" on page 543
• ":POWer:SIGNals:IEXPected" on page 544
• ":POWer:SIGNals:OVERshoot" on page 545
• ":POWer:SIGNals:VSTeady" on page 547
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 548
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 549