manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Reference Manual

Share
Download
Agilent Technologies 8960 Series 10 Reference Manual Download Page 568

568

S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\conf_timebase.fm

Timebase Description/Configuration

Timebase Description/Configuration

February 14, 2000

Description

The time base source is selected by the test set, either an internal time base or an external source (if a suitable 
signal is detected) is used as the reference oscillator. If a 10 MHz +/- 100 ppm signal, that has an input level 
from 0 to +13 dBm is connected to the 10 MHz REF IN connector on the rear panel, the test set will 
automatically select the external timebase. 

The user can read the status window at the bottom of the test set display for the EXT REF indicator, or query 
the test set to verify if it is using an external time base or an internal time base. The user may also query the 
test set to verify if the time base is locked. The reference oscillator functionality is controlled through the 
SYSTEM subsystem.

Example:

OUTPUT 714;”SYSTEM:ROSCILLATOR[:TIMEBASE]?” !returns INT or EXT

                                            !(internal or external) timebase.

OUTPUT 714;”SYSTEM:ROSCILLATOR:LOCKED?” !returns 1 or 0 (locked or unlocked)

                                        !condition for timebase

Related Topics

*******************************************************

“SYSTem:ROSCillator” on page 495

“Rear Panel Connectors” on page 547

*******************************************************

Summary of Contents for 8960 Series 10







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands