manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Reference Manual

Share
Download
Agilent Technologies 8960 Series 10 Reference Manual Download Page 176

176

 S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\prog_prog_guide_step4.fm

Step 4: Establish an Active Link with Mobile Station

Process for Making a Base Station Originated Call

The recommended process for making a base station originated call is shown in

“Step 4: Figure 1. Process for Making a Base Station Originated Call” on page 177

.

The CALL:ORIGinate command is used to initiate a base station originated call.

If the call origination process fails it is necessary to send the CALL:END command to the test set to force 
immediate termination of all processes associated with the current call origination. This ensures that if 
another CALL:ORIGinate command is sent to the test set before all processes associated with the failed call 
origination have been terminated, it will not be ignored. Note that if the test set is currently executing a call 
origination and it receives another call origination command it will be ignored (that is, you are telling the test 
set to do something it is already doing and hence it will accept the command but it will be ignored).

Summary of Contents for 8960 Series 10







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands