manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Reference Manual

Share
Download
Agilent Technologies 8960 Series 10 Reference Manual Download Page 309

309

S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_daudio.fm

FETCh:DAUDio

FETCh:DAUDio[:ALL]?

FETCh:DAUDio:ICOunt?

FETCh:DAUDio:INTegrity?

FETCh:DAUDio:AMPLitude[:AVERage]?

Function

Queries integrity indicator and average decoded audio results. Values are returned in a 
comma-separated list.

Query

Integrity indicator:

• Range: 0 to 16

• Resolution: 1

Decoded audio:

• Range: 0 to 100%

• Resolution: 0.01% FS

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Function

Queries the intermediate count of decoded audio multi-measurements completed.

This value is not displayed on the test set.

Query

Range: 1 to 999

Resolution: 1

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Function

Queries the integrity indicator for the last decoded audio measurement completed. Zero indicates 
a normal measurement. 

See 

“Integrity Indicator” on page 125

 for descriptions of non-zero integrity indicators.

Query

Range: 0 to 16

Resolution: 1

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Function

Queries the average decoded audio result from an uplink speech level measurement in percent 
full scale.

If the decoded audio multi-measurement count field is off, the level returned by this command is 
displayed in the Decoded Audio Level field. If the decoded audio multi-measurement count is on, 
the level returned by this query is displayed in the Average field

Query

Range: 0 to 100%

Resolution: 0.01% FS

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Summary of Contents for 8960 Series 10







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands