manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Reference Manual

Share
Download
Agilent Technologies 8960 Series 10 Reference Manual Download Page 295

295

S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_description.fm

FETCh? Subsystem

FETCh? Subsystem

Description

The FETCh? query is a function that allows users to query results from a measurement that was previously 
INITiated or READ. It does NOT begin a measurement. If no measurement is in progress it will return the 
integrity and measurement values from the last measurement made, or return an integrity of No Result 
Available and results of NAN. If a measurement is in process, the query will hang until the results are 
available, or the measurement fails or times out. The exact results returned with a FETCh? will depend on the 
specific measurement. A measurement may have a number of different results or combination of results for a 
FETCh?. The FETCh? queries are intended to be used to provide overlapped operation access to measurement 
results from the test set. When used along with SETup and INITiate commands , FETCh? is the primary way 
for the user to retrieve measurement results. In order to use the test set’s concurrent test capabilities the 
overlapped commands of INITiate and FETCh? must be used. Overlapped commands allow the user to send 
commands and not wait for completion.

Syntax Diagrams and Command Descriptions

“FETCh:AAUDio” on page 296

“FETCh:BERRor” on page 300

“FETCh:DAUDio” on page 308

“FETCh:DPOWer” on page 312

“FETCh:FBERror” on page 314

“FETCh:IQTuning” on page 318

“FETCh:ORFSpectrum” on page 322

“FETCh:PFERror” on page 329

“FETCh:PVTime” on page 336

“FETCh:TXPower” on page 349

Summary of Contents for 8960 Series 10







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands