Agilent Technologies 8960 Series 10 Reference Manual Download Page 361

Page: 361 / 614

361

S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_read.fm

READ

READ:AAUDio[:ALL]?

READ:BERRor[:ALL]?

Function

Queries (initiates and fetches) one analog audio measurement as a sequential operation.

Returns Integrity Indicator, see

“Integrity Indicator” on page 125

and analog audio (average).

The FETCh command should be used to obtain other measurement results. See

“FETCh:AAUDio” on page 296

Query

Integrity indicator

• Range: 0 to 16

• Resolution: 1

Analog audio (average)

• Range: 0 to 20 volts

• Resolution: 0.1mv

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Function

Queries (initiates and fetches) one RX bit error measurement as a sequential operation.

Returns Integrity Indicator see

“Integrity Indicator” on page 125

, Bits Tested, Bit Error Ratio

and Bit Error Count for the bit type set using the SETup:BERRor[:TYPE] command. (A similar
query,

“READ:BERRor:FULL?” on page 362

, returns the same results but for all bit types

simultaneously.) The FETCh command should be used to obtain other measurement results. See

“FETCh:BERRor” on page 300

Query

Integrity indicator

• Range: 0 to 16

• Resolution: 1

Bits tested

• Range: 0 to (<RX bits to test +131) and 9.91E+37 (NAN)

• Resolution: 1

Bit error ratio

• Range: 0 to 100 and 9.91E+37 (NAN)

• Resolution: 1

Bit error count

• Range: 0 to (<RX bits to test +131) and 9.91E+37 (NAN)

• Resolution: 1

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Summary of Contents for 8960 Series 10






































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8960 Series 10

Reviews:

Related manuals for 8960 Series 10

Brands by name

Popular brands

Agilent Technologies 8960 Series 10, Reference Manual

Search results

Summary of Contents for 8960 Series 10

Reviews:

Related manuals for 8960 Series 10

Brands by name

Popular brands