manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Reference Manual

Share
Download
Agilent Technologies 8960 Series 10 Reference Manual Download Page 551

551

S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\gen_remote_local.fm

Remote/Local Mode

Remote/Local Mode

Description

Remote Mode

When the test set is operated remotely, all of the keys on the front panel of the test set are disabled (except the 
LOCAL key and the power switch). During remote operation the test set is controlled by the Remote User 
Interface, (RUI).

Any open menus will be closed, and any manual entries will be aborted when the test set transitions from local 
mode to remote mode.

The user will need to press the LOCAL key on the front panel in order to gain manual control of the test set, if 
the test set is in remote mode.

The remote annunciator (R) will appear on the test set’s display to indicate that the test set is in remote mode.

Local Mode

During local mode all front panel keys and the knob are enabled. During local operation the test set is 
controlled by the Manual User Interface, (MUI).

The remote annunciator (R) is turned off when the test set is operated in local mode.

Summary of Contents for 8960 Series 10







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands