manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Reference Manual

Share
Download
Agilent Technologies 8960 Series 10 Reference Manual Download Page 476

476

 S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_system_app.fm

SYSTem:APPLication

SYSTem:APPLication:CATalog:LICense?

SYSTem:APPLication:CATalog:REVision?

SYSTem:APPLication:CATalog:REVision:COUNt?

Function

Query the license status for a selected revision. 

The query must include two strings separated by a comma. The test application name and 
revision must be entered as they appear in the test application Setup menu, with the exception 
that the string is not case sensitive and can be entered in any combination of upper and lower 
case letters.

The returned values are:

• “LIC” indicates this is a licensed test application.

• “NLIC” indicates this is not a licensed test application.

• “UNKN” indicates that license status is unknown.

Query

Range: LIC|NLIC|UNKN

Programming Example

OUTPUT 714;”SYSTEM:APPLICATION:CATALOG:LICENSE? ‘GSM mobile test’,’A.04.00’”

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Function

Query the test set for all of the revision numbers stored on the test set’s hard drive. You must 
specify a test application. 

Query

Range: One or more comma separated strings including a null string

Programming Example

OUTPUT 714;”SYSTEM:APPLICATION:CATALOG:REVISION? ‘AMPS/136 MOBILE TEST’”

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Function

Query the test set for the number of revisions present on the hard disk for a specified test 
application. Up to 30 revisions can be stored for a test application.

Query

Range: 0 through 30

Programming Example

OUTPUT 714;”SYSTEM:APPLICATION:CATALOG:REVISION:COUNT? ‘AMPS/136 MOBILE TEST’”

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Summary of Contents for 8960 Series 10







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands