Agilent Technologies 8960 Series 10 Reference Manual Download Page 3

Page: 3 / 614

Legal Information

Legal Information

Manufacturer’s Declaration

This statement is provided to comply with the requirements of the German Sound Emission Directive, from 18
January 1991.

This product has a sound pressure emission (at the operator position) < 70 dB(A).

• Sound Pressure Lp < 70 dB(A).

• At Operator Position.

• Normal Operation.

• According to ISO 7779:1988/EN 27779:1991 (Type Test).

Herstellerbescheinigung

• Schalldruckpegel Lp < 70 dB(A).

• Diese Information steht im Zusammenhang mit den Anforderungen der

Maschinenlärminformationsverordnung vom 18 Januar 1991.

• Am Arbeitsplatz.

• Normaler Betrieb.

• Nach ISO 7779:1988/EN 27779:1991 (Typprüfung).

Summary of Contents for 8960 Series 10






































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8960 Series 10

Reviews:

Brands by name

Popular brands

Agilent Technologies 8960 Series 10, Reference Manual

Search results

Summary of Contents for 8960 Series 10

Reviews:

Brands by name

Popular brands