Agilent Technologies 2000 X, User Manual

Page: 253 / 296

Utility Settings
19
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 253
Configuring the [Quick Action] Key
The [Quick Action] key lets you perform common, repetitive actions by
pressing a single key.
To configure the
[Quick Action]
key:
1
Press
[Utility] > Quick Action > Action
; then, select the action that should be
performed:
• Off — disables the [Quick Action] key.
• Quick Measure All — displays a popup containing a snapshot of all the
single waveform measurements. The
Source
softkey lets you select the
waveform source (which also becomes the source selection in the
Measurement Menu). See
Chapter 13 , “Measurements,” starting on
page 169.
•
Quick Print
— prints the current screen image. Press
Settings
to set up
the printing options. See Chapter 18 , “Print (Screens),” starting on
page 231.
•
Quick Save
— saves the current image, waveform data, or setup. Press
Settings
to set up the save options. See Chapter 17 , “Save/Recall
(Setups, Screens, Data),” starting on page 217.
• Quick Recall — recalls a setup, mask, or reference waveform. Press
Settings
to set up the recall options. See Chapter 17 , “Save/Recall
(Setups, Screens, Data),” starting on page 217.
• Quick Freeze Display — freezes the display without stopping running
acquisitions or un- freezes the display if currently frozen. For more
information, see
"To freeze the display" on page 105.
•
Quick Trigger Mode
— toggles the trigger mode between Auto and
Normal, see "To select the Auto or Normal trigger mode" on
page 136.
•
Quick Clear Display
— clears the display, see "To clear the display" on
page 104.
Once the [Quick Action] key is configured, you simply press it to perform
the selected action.