manualshive.com logo in svg

Agilent Technologies 2000 X, User Manual

Share
Download
Agilent Technologies 2000 X User Manual Download Page 217

217

Agilent InfiniiVision 2000 X-Series Oscilloscopes 
User's Guide

 

s

1

17
Save/Recall (Setups, Screens, Data)

Saving Setups, Screen Images, or Data

217

Recalling Setups, Masks, or Reference Waveforms

227

Recalling Default Setups

229

Performing a Secure Erase

229

Oscilloscope setups, reference waveforms, and mask files can be saved to 
internal oscilloscope memory or to a USB storage device and recalled 
later. You can also recall default or factory default setups.

Oscilloscope screen images can be saved to a USB storage device in BMP 
or PNG formats.

Acquired waveform data can be saved to a USB storage device in 
comma- separated value (CSV), ASCII XY, binary (BIN), and Agilent logic 
analyzer binary (ALB) formats.

There is also a command to securely erase all the oscilloscope's 
non- volatile internal memory.

Saving Setups, Screen Images, or Data

1

Press the 

[Save/Recall]

 key.

2

In the Save/Recall Menu, press 

Save

.

3

In the Save Trace and Setup Menu, press 

Format

, then, turn the Entry 

knob to select the type of file you want to save:

Summary of Contents for 2000 X









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands