Agilent Technologies 2000 X User Manual Download Page 220

Page: 220 / 296

220

Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

Save/Recall (Setups, Screens, Data)

•

Setup Info

— setup information (vertical, horizontal, trigger, acquisition,

math, and display settings) is also saved in a separate file with a
TXT extension.

•

Invert Grat

— the graticule in the image file has a white background

instead of the black backgound that appears on- screen.

•

Palette

— lets you choose between

Color

Grayscale

images.

Finally, press the

Press to Save

softkey.

A message indicating whether the save was successful is displayed.

See Also

•

"Adding an Annotation"

on page 254

To save CSV, ASCII XY, or BIN data files

Data files can be saved to an external USB storage device.

Press

[Save/Recall] > Save > Format

; then, turn the Entry knob to select

CSV data (*.csv)

ASCII XY data (*.csv)

, or

Binary data (*.bin)

Graticule Not Inverted

Graticule Inverted

N O T E

When saving screen images, the oscilloscope uses the last menu visited before pressing
the [Save/Recall] key. This lets you save any relevant information within the softkey menu
area.

To save a screen image showing the Save/Recall Menu at the bottom, press the
[Save/Recall] key twice before saving the image.

N O T E

You can also save the oscilloscope's display image using a web browser. See

"Get

Image"

on page 267 for details.

Summary of Contents for 2000 X









































































































































































































































































































Search results

Summary of Contents for 2000 X

Reviews:

Brands by name

Popular brands

Agilent Technologies 2000 X, User Manual

Search results

Summary of Contents for 2000 X

Reviews:

Brands by name

Popular brands