Agilent Technologies 2000 X, User Manual

Page: 184 / 296

184 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
13
Measurements
Delay
Delay measures the time difference from the selected edge on source 1
and the selected edge on source 2 closest to the trigger reference point at
the middle threshold points on the waveforms. Negative delay values
indicate that the selected edge of source 1 occurred after the selected
edge of source 2.
1
Press the
[Meas]
key to display the Measurement Menu.
2
Press the
Source
softkey; then turn the Entry knob to select the first
analog channel source.
3 Press the Type: softkey; then, turn the Entry knob to select Delay .
4 Press the Settings softkey to select the second analog channel source
and slope for the delay measurement.
The default Delay settings measure from the rising edge of channel 1 to
the rising edge of channel 2.
5 Press the Back/Up key to return to the Measurement Menu.
6 Press the Add Measurement softkey to make the measurement.
The example below shows a delay measurement between the rising edge of
channel 1 and the rising edge of channel 2.
Source 2
Source 1
Delay
Back