Aerotech UNIDEX 600 Series, User Manual

Page: 188 / 354

U600 User’s Guide Setup Wizard
Version 1.4
Aerotech, Inc.
12-9
Figure 12-8. The Axis Configuration Wizard – Primary Feedback Screen
Selecting ‘Next’ will advance you to the next Wizard configuration screen, ‘Back’ will
take you to the previous Wizard screen, ‘Cancel’ will exit the Wizard without saving any
changes to the axis configuration. ‘Finish’ will save the axis configuration and exit the
Wizard.
12.4.5. Configuring a DAC Channel
The D/A (D2A, DAC, or Digital to Analog Converter) channel number must be specified
for all axes (except virtual), to provide the command (velocity or torque) to the driver
module.
Figure 12-9. The Axis Configuration Wizard – D2A Screen