Aerotech UNIDEX 600 Series, User Manual

Page: 173 / 354

AerPlot3D U600 User’s Guide
9-4
Aerotech, Inc.
Version 1.4
9.1.8. Stop Menu
The Stop menu will discontinue plotting the selected item. If the “Show Min and Max
Plotted Values” item is selected on the Setup menu, the Min and Max Value Plotted
window will be displayed (similar to Figure 9-3), allowing you to optionally click the
Update X, Y, or Z buttons to rescale the displayed range of the plot. Click the “Close”
button when done.
9.1.9. Resume Menu
The Resume menu will continue plotting the selected data items if the Suspend menu has
been selected.
9.1.10. Suspend Menu
The Suspend menu will suspend plotting of the selected data items. The Resume menu
will continue plotting.
9.1.11. Help Menu
The Help menu has 2 selections.
The Aerotech UNIDEX 600 Help menu selection will display the information in the
online help file for AerPlot3D.
The About U600 AerPlot3D will display version information for AerPlot3D.
9.2. Auto Scaling the Display in AerPlot3D
To automatically scale the display window in AerPlot3D (assuming that your CNC
program is in G90 mode):
•
Select Start form the menu bar to trigger AerPlot3D
•
Run your CNC program
•
Select Stop form the menu bar
•
Click the “Update X” and “Update Y” (and “Update Z” where applicable)
buttons
•
Select “Start”, again, to trigger AerPlot3D
•
Run your CNC program a second time
∇ ∇ ∇