88
Using your fingers, turn the Ring counter clockwise 5 degrees
until the tabs engage, then tighten it 5 more degrees by turning
it counter clockwise with the aide of a small blade screwdriver,
pressing against the upper/left arm of the Ring (Fig. 92).
NOTE: If available, an adjustable face spanner
tool or pair of pointed pliers can be used by plac-
ing the tips in the small holes of the Ring (Fig. 93).
Inspection
Activate the unit and watch carefully as it performs a full diag-
nostic and battery check, and enters Surface Mode. Observe the
LCD display to ensure it is consistently clear and sharp in con-
trast throughout the screen.
WARNING: If any portions of the display are miss-
ing or appear dim, or a Low Battery condition is in-
dicated, return your ATMOS 2 to an Authorized
AERIS Dealer for a complete evaluation before at-
tempting to use it.
Fig. 92 -Ring Installation
Fig. 93 -Ring Installation
(alternate)
