68
To access the Time to Desaturate Countdown -
press the Advance (Front) button
3 times
(while in Surface Mode)
The countdown starts 10 minutes after surfacing at 23:50 (hr:min) maximum and counts down
to 0:00 (hr:min). The Time to Desaturate Countdown displays the graphic SAT and a counter
(Fig. 67) that provides calculated time for tissue desaturation (release of nitrogen loading) at
sea level.
If a violation occurred during the dive, Desaturation Time will not be displayed.
The unit will revert to Surface Mode after 2 minutes, unless the Advance (Front) button is
pressed to access the Log Mode.
Two hours after the last dive, the Time to Fly and Desaturation countdowns will be displayed
alternately for 3 seconds each until they count down to 0:00 or another dive is made. Access to
other modes is gained by pressing Either button to return to Surface Mode.
LOG MODE
Information from your latest 24 dives is stored in the
Log
for
viewing. The first dive of a new Activation Period will be #1, then
#2, etc. After 24 dives are accumulated, each subsequent dive will
overwrite the oldest dive in the Log (i.e., the most recent dive de-
letes the oldest). Log information will not be lost when the battery
is removed, but factory service will delete data.
Dives are displayed in a reverse sequence that starts with the dive
most recently recorded back to the oldest of the 24 dives stored.
Thus, your most recent dive will always be the first shown in the
sequence. Log screens are Date/Time started, Nitrogen data, and
Oxygen data.
Fig. 67 - Time to Desaturate
