82
CARE AND CLEANING
Protect your ATMOS 2 from shock, excessive temperatures,
chemical attack, and tampering. Protect the lens against scratches
with a transparent Instrument Lens Protector. Small scratches will
naturally disappear underwater.
CAUTION: Never spray aerosols of any kind on, or
near, the instrument. The propellants may chemi-
cally attack the plastic.
Soak and rinse the ATMOS 2 in fresh water at the end of each
day of diving, and check to ensure that the areas around the low
pressure (depth) sensor (Fig. 85), download interface port, and
buttons are free of debris or obstructions.
To dissolve salt crystals, use lukewarm water or a slightly
acidic white vinegar/water bath.
After removal from the bath, place the unit under gently run-
ning water and towel dry before storing.
Transport your unit cool, dry, and protected.
WARNING: Never force any object through any
slots or holes of the Housing. Doing so may dam-
age the depth sensor, possibly resulting in errone-
ous depth and/or dive time remaining displays.
Fig. 85 -Depth Sensor
