manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 69

69

Button Control in Log Mode -

•  The Advance (Front) button is used to access a specific dive's

Log.

•  The Select (Side) button is used to view the second and third

screens (Nitrogen and Oxygen related data) for that dive.

•  To return to Surface Mode at any time while in Log Mode,

press Both buttons simultaneously for 2 seconds.

•  The unit will automatically revert to Surface Mode after 2 min-

utes if no button is pressed while in the Log Mode.

HINT:  To bypass a dive's Log and search for an-

other in the  sequence, press the Advance (Front)

button repeatedly.  Do not press the Select (Side)

button until you find the dive Log you wish to view.

Dives are identified by the Date/Time started and

'number' for that day.

To access the Log Mode and view the First Screen 

(Fig. 68) -

•  press the Advance (Front) button 

4 times

 (while in Surface

Mode)

•  the first screen of the most recent dive will appear displaying  -

      •  the Log Mode icon

      •  Dive Number (for that period of activation)

      •  Date/Time of Day that the dive started

Fig. 68 - Log (1st screen)

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands