86
Fig. 88 - Battery Compartment
NOTE: If the old battery can be removed and the
new one inserted within 8 seconds, nitrogen and
oxygen calculations ,and settings, will be retained
for repetitive dives.
Battery Removal
Remove the Retaining Bar located across the lower portion of
the Battery (Fig. 88a).
Remove the Hatch O-ring. DO NOT use tools.
Using care not to damage the Battery Contacts (Fig. 88 b/c),
slide the Battery up and out of the right side of the Battery Com-
partment.
CAUTION: Do not allow a metal object to short cir-
cuit the top of the Battery which is positive (+) to
the negative ( - ) contact of the Battery Compart-
ment.
Closely check all of the sealing surfaces for any signs of dam-
age that might impair proper sealing.
Inspect the Buttons, Lens, and Housing to ensure they are not
cracked or damaged.
If it is necessary to clean the Battery Compartment, flush it and
all components with a solution of 50% white vinegar and 50%
fresh water. Rinse with fresh water, and allow to dry overnight,
or blow dry with a hair dryer (set at 'no heat').
a
b
c
