manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 49

49

During conditions in which cautionary type information is displayed (e.g., Decompression, High

PO2, etc.), there is a Main Display of important information relevant to the specific condition.

The diver can access  another display, but it will automatically  revert to the Main Display after 3

seconds.

To activate the Backlight, press the Select (Side) button.

•  The displays will be illuminated as long as the button is depressed, plus it will remain illumi-

nated for the Backlight Duration time that has been set  (0, 3, or 7 seconds).

•  The Backlight will not activate during a Low Battery condition.

NO DECOMPRESSION DIVE MODE

The ATMOS 2 will enter the No Decompression Dive Mode when

you descend deeper than 4 feet (1.2 meters).

No Decompression Dive Mode - Display #1 

(Fig. 44)

Information includes Current Depth, Dive Time Remaining (and

Mode icon), Maximum Depth for that dive (and icon), Elapsed

Dive Time (and icon), and the applicable bar graphs.

•  press and release the Advance (Front) button to view Display

#2.

Fig. 44 - No Deco #1

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands