manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 79

79

Ascending

•  Press and hold the Advance (Front) button for 2 seconds to ac-

cess  Ascent.  The 

UP Arrow

 will appear flashing (Fig. 82).

•  Press and release the Advance (Front) button 

again

 to begin an

Ascent at a rate of 60 feet (18 meters) per minute at depths

deeper than 60 feet (18 meters), or a rate of 30 feet (9 meters)

per minute at depths of 60 feet (18 meters) and shallower.

•  Press and release the Advance (Front) button during the Ascent

to stop the Ascent.

•  Alternate Displays cannot be accessed during Simulated Ascent.

•  Press and release the Advance (Front) button to 

accelerate

 the

Ascent Rate to 180 feet (54 meters) per minute (Fig. 83).

•  Press and release the Advance (Front) button during the Accel-

erated Ascent stops the Ascent, but does not restore normal As-

cent Rate.  Pressing and holding the button for 2 seconds will

acknowledge and disable the alarm, however the Accelerated

rate will continue.  To slow the Ascent, press the Advance

(Front) button momentarily.

•  To exit Simulator Mode, press and hold Both buttons simulta-

neously for 2 seconds to  revert operation to real Surface Mode.

Fig. 82 - Simulated Ascent

Fig. 83 - Ascent Accelerated

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands