manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 39

39

TO SET - SAMPLING RATE 

(while in the Surface Mode)

Factory set for 30 (seconds), the Sampling Rate can be set to val-

ues of 2, 15, 30, or 60 (seconds), or 2, 5, 10 feet (.5, 1.5, 3 meters).

Sampling Rate is the interval at which data samples are recorded

during a dive for subsequent download to the PC program.  This

setting has no effect on displayed data or data in the unit's Log.

•  Press Both buttons simultaneously, release when 

SET: 2

 ap-

pears.

•  Press and release the Advance (Front) button, the Units screen

appears with the set point

 

 flashing.

•  Press the Advance (Front) button 

13 more times.

•  The graphic SR and SECS (or FEET) appear with the

 

Sampling

Rate

 value

  flashing (Fig. 38).

•  Press and release the Select (Side) button to advance the Rate

one selection at a time, or press and hold the button to scroll

through the Set Points.

•  Press the Advance (Front) button to accept the setting and ad-

vance to Set Digital Gauge Mode, or press and hold Both but-

tons for 2 seconds to revert to Surface Mode.

Fig. 38 - Set Sampling Rate

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands