manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 33

33

TO SET - AUDIBLE ALARM 

(while in the Surface Mode)

Factory set for ON, the Alarm can be also be set to OFF.  This set-

ting also applies to the LED Warning Indicator that is synchronized

with the Audible.

When set OFF, the Alarm will not sound during the conditions de-

scribed on page 13.

•  Press Both buttons simultaneously, release when 

SET: 2

 ap-

pears.

•  Press and release the Advance (Front) button, the Units screen

appears with the set point

 

 flashing.

•  Press the Advance (Front) button 

7 more times.

•  The graphic 

ALM

 and Alarm (speaker)  icon appear with 

ON

(or OFF) flashing (Fig. 32).

•  Press  the Select (Side) button to toggle between ON and OFF.

•  Press the Advance (Front) button to accept the setting and ad-

vance to Set Max Nitrogen Bar Graph Alarm, or press and hold

Both buttons for 2 seconds to revert to Surface Mode.

Fig. 32- Set Audible Alarm

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands