manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 53

53

•  press and hold the Advance (Front) button for 2 seconds to ac-

knowledge and silence the Audible Alarm (unless set OFF).

•  press and release the Advance (Front) button to view Alt #1.

Deco Dive Mode - Alternate Display #1 

(Fig. 50)

Information includes - Current Depth, Total Ascent Time, Maxi-

mum Depth for that dive (and icon), Elapsed Dive Time (and icon),

and the applicable bar graphs.

•  press and release the Advance (Front) button to view Alt #2.

Deco  Dive Mode - Alternate Display #2 

(Fig. 51)

This display is only available during nitrox dives.

Information includes -  Current Depth, Total Ascent Time, the let-

ters PO2 and current value of PO2, and applicable bar graphs.

•  press the Advance (Front) button to view the Main Display.

NOTE:  While in  Deco Dive Mode, the ATMOS 2

will automatically  revert to the Main (Default) Dis-

play after 3 seconds unless the Advance (Front)

button is pressed to view an Alternate Display of

information.

Fig. 51 -Deco Alternate #2

Fig. 50 -Deco Alternate #1

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands