manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 36

36

TO SET - MAX PO2 ALARM 

(while in the Surface Mode)

Factory set for 1.60 (ATA), the Maximum PO2  Alarm can be set

to values between 1.20 and 1.60 (ATA) in increments of .10

(ATA).

•  Press Both buttons simultaneously, release when 

SET: 2

 ap-

pears.

•  Press and release the Advance (Front) button, the Units screen

appears with the set point

 

 flashing.

•  Press the Advance (Front) button 

10 more times.

•  The graphics 

PO2 

and

 MAX

, and Alarm icon appear with the

PO2 value

  flashing (Fig. 35).

•  Press and release the Select (Side) button to advance the Alarm

value in increments of .10 (ATA), or press and hold the button

to scroll through the Set Points.

•  Press the Advance (Front) button to accept the setting and ad-

vance to Set FO2 50% Default, or press and hold Both buttons

for 2 seconds to revert to Surface Mode.

Fig. 35 - Set Max PO2 Alarm

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands