manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 66

66

AFTER THE TRANSITION PERIOD (THE FIRST 2 HOURS)

For the remainder of the 

first 2 hours after surfacing

, informa-

tion will be displayed as Surface Mode (Fig. 64) and you will have

full access to other modes (e.g., Plan, Fly, Desat, Log, Set, PC,

Sim).

To activate the 

Backlight

, press the Select (Side) button.

To access the Dive Planner (Plan Mode) -

•  press the Advance (Front) button 1 time (while in Surface

Mode)

•  press and release the Select (Side) button to advance through

the sequence of available 'adjusted' depths/times one screen at a

time.

•  The unit will revert to Surface Mode after 2 minutes, unless the

Advance (Front) button is pressed to access the Fly Mode.

The Dive Planner now shows 'adjusted' No Decompression Limits

(Fig. 65) based on residual nitrogen and accumulated oxygen cal-

culated to be remaining from the previous dives.

NOTE:  The Planning Sequence will only advance

to the maximum depth allowed by the nitrogen or

oxygen limit, whichever is in control.  The respec-

tive bar graph will be displayed to indicate which

is in control.

Fig. 64- Surface Mode

Fig. 65 - Plan Mode

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands