manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 29

29

ENTERING SETTINGS -SET MODE #2

NOTE:  To return to Surface Mode at any time while

in Set Mode, press and hold Both buttons for 2

seconds.  The unit will automatically revert to Sur-

face Mode after 2 minutes if no button is pressed.

TO SET - UNITS OF MEASURE 

(while in the Surface Mode)

Factory set for  Imperial, Units of Measure can also be set for Met-

ric.

•  Press Both buttons simultaneously, release when SET: 2 ap-

pears.

•  Press and release the Advance (Front) button, the Units screen

appears with the graphics 

F 

  (or M), and the Temperature icon

and letter  F (or C) appear with

 

 flashing (Fig. 25).

•  Press  the Select (Side) button to toggle between Imperial (F )

and Metric (M and  C) units.

•  Press the Advance (Front) button to accept the setting and ad-

vance to Set Hour Format, or press and hold Both buttons for 2

seconds to revert to Surface Mode.

Fig. 25 - Set Units of Measure

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands