manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 34

34

TO SET - MAX NITROGEN BAR GRAPH ALARM

(while in the Surface Mode)

Factory set for DECO (all 8 segments), the Maximum Nitrogen Bar

Graph (NiBG) Alarm can be set to values between DECO (8 seg-

ments) and 1 segment.

•  Press Both buttons simultaneously, release when 

SET: 2

 ap-

pears.

•  Press and release the Advance (Front) button, the Units screen

appears with the set point

 

 flashing.

•  Press the Advance (Front) button 

8 more times.

•  The graphic 

ndc

 and Alarm icon appear with the full 

 Nitrogen

Bar Graph

  flashing (Fig. 33).

•  Press and release the Select (Side) button to decrease the num-

ber of segments one at a time, or press and hold the button to

scroll through the Set Points.

•  Press the Advance (Front) button to accept the setting and ad-

vance to Set Dive Time Remaining Alarm, or press and hold

Both buttons for 2 seconds to revert to Surface Mode.

Fig. 33 - Set Max Nitrogen Bar

Graph Alarm

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands