manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 76

76

SIMULATOR MODE

This mode provides you with the ability to practice various dive

mode scenarios and computer functions while observing the vari-

ous displays.

•  At any time while in Simulator Mode, pressing and holding

both buttons simultaneously for 2 seconds shall revert operation

to real Surface Mode.

•  The set points entered into the ATMOS 2 do not affect the op-

eration of the Simulator which has its own settings that allow

Digital Gauge Mode to be set ON or OFF, calculations to be

cleared, and FO2 to be set.

Access and Setup

 (while in Surface Mode)

•  Press and hold Both buttons for 6 seconds.

•  Release the buttons during the 2 second window when the 

SIM

graphic appears (Fig. 75).

•  Press and release the Advance (Front) button to access Simula-

tor Mode.  The graphics 

DEMO

 and 

GAUG

 will appear with

OFF

 (or ON) flashing (Fig. 76).

When  Gauge is set ON, the Simulator will operate as the unit

would in normal User Set Digital Gauge Mode, only displaying

Depth, Max Depth,  Elapsed Dive Time, and Time of Day.  When

set OFF, it operates as it would as an Air or Nitrox computer.

Fig. 76 - Set Demo Gauge

Fig. 75 - Simulator  Mode

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands