manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 57

57

Immediate Violation Mode and Gauge Mode

The ATMOS 2 enters Immediate Violation Mode when a situation

totally exceeds its capacity to predict an ascent procedure.  These

dives represent gross excursions into decompression that are be-

yond the boundaries and spirit of the ATMOS 2 design, and an

ATMOS 2 should not be used for the dives.

During a Dive, if a ceiling much greater than 60 FT (18M) is re-

quired, an 

Immediate Violation Mode

 will be entered.  This situa-

tion would be preceded by entering Delayed Violation Mode #2,

previously described.  The ATMOS 2 would then operate with lim-

ited functions in 

Gauge Mode 

during the remainder of that dive

and for 24 hours after surfacing.

Gauge Mode

 turns the ATMOS 2 into a digital instrument without

any decompression or oxygen monitoring functions.   Only Current

Depth, Max Depth, Elapsed Dive Time, and  the Ascent Rate Indi-

cator will be displayed (Fig. 56).  The Nitrogen Bar Graph and O2

Bar Graph will flash as a warning of this condition.

•  To view Temperature and Time of Day - press the Advance

(Front) button.

•  To activate the Backlight - press the Select (Side) button.

Fig. 56  - Immediate Violation

Gauge Mode (underwater)

Flashing

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands