manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 35

35

TO SET - DIVE TIME REMAINING ALARM

(while in the Surface Mode)

Factory set for 0:00 (minutes), the Dive Time Remaining  Alarm

can be set to values between 0:00 and 0:20 (minutes) in increments

of 1 minute.

•  Press Both buttons simultaneously, release when 

SET: 2

 ap-

pears.

•  Press and release the Advance (Front) button, the Units screen

appears with the set point

 

 flashing.

•  Press the Advance (Front) button 

9 more times.

•  The graphic 

dtr

 and Alarm and Dive Mode icons appear with

the

 Dive Time Remaining 

value  flashing  (Fig. 34).

•  Press and release the Select (Side) button to advance the Alarm

value in increments of one minute, or press and hold the button

to scroll through the Set Points.

•  Press the Advance (Front) button to accept the setting and ad-

vance to Set Max PO2 Alarm, or press and hold Both buttons

for 2 seconds to revert to Surface Mode.

Fig. 34 - Set Dive Time Remain-

ing Alarm

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands