manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 41

41

TO SET - WET ACTIVATION 

 (while in the Surface Mode)

Factory set ON, this feature can also be set OFF (disabled).  When

set ON, the ATMOS 2 will automatically Activate and enter Dive

Mode upon immersion in water and descent to 5 feet (1.5 meters).

WARNING:  If the Wet Activation feature is set OFF,

the ATMOS 2 must be manually (push button) acti-

vated prior to commencing a dive.

•  Press Both buttons simultaneously, release when 

SET: 2

 ap-

pears.

•  Press and release the Advance (Front) button, the Units screen

appears with the set point

 

 flashing.

•  Press the Advance (Front) button 

15 more times

 (14 more

times if a dive was made with Digital Gauge Mode set ON).

•  The graphics 

ACT

 and 

H2O

 appear with

 ON 

(or OFF)  flash-

ing (Fig. 40).

•  Press  and release the Select (Side) button to toggle between

ON and OFF.

•  Press the Advance (Front) button to accept the setting and re-

vert to Surface Mode.

Fig. 40 -  Set Water Activation

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands