manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 50

50

No Decompression Dive Mode - Display #2 

(Fig. 45)

Information includes Current Depth, Dive Time Remaining (and

Mode icon), Temperature, Time of Day, and the applicable bar

graphs.

•   press and release the Advance (Front) button to view Display

#3  (only if FO2 is set for a numerical value - Nitrox), or Dis-

play #1 (if FO2 is set for Air).

No Decompression Dive Mode - Display #3 

(Fig. 46)

Information includes -  Current Depth, Dive Time Remaining (and

Mode icon), current value of PO2 (if a nitrox dive), and applicable

bar graphs.

•  press the Advance (Front) button to view Display #1.

No Decompression Dive Mode - SAFETY STOP

Upon ascending to 20 feet (6 meters) on any No Decompression

dive in which Depth exceeded 30 feet (9 meters), a short beep will

sound and a Safety Stop screen will appear displaying a Stop at 15

feet (4.5 meters) with a 3 minute countdown timer that counts

down from 3:00 to :00 (min:sec).

Fig. 46- No Deco #3

Fig. 45- No Deco #2

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands