manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 55

55

The added Penalty (decompression) Time will have to be 'worked

off' first, before obtaining off-gassing credit.  Once the Penalty

Time is worked-off, and off-gassing credit begins, required decom-

pression Stop Depths and Time will decrease toward zero, then the

Nitrogen Bar Graph will recede into the yellow Caution Zone and

the ATMOS 2 will revert to the No Decompression Dive Mode.

NOTE:  Upon entry into Delayed Violation Modes,

the Audible Alarm will sound, even if it is user Set

OFF.  It cannot be turned off (acknowledged) by

pressing the Advance (Front) button.

Delayed Violation Mode #1 

(Fig. 53)

If you remain above the Required Ceiling Stop Depth for 'more

than 5 minutes',

 the Nitrogen Bar Graph and Total Ascent Time

display will flash until you descend below the Required Stop

Depth.  This is a continuation of a Conditional Violation.

Delayed Violation Mode #2 

(Fig. 54)

The ATMOS 2 cannot calculate decompression times for Stop

Depths much greater than 60 feet (18 meters) and offers no indica-

tion of how much dive time would result in the need for a greater

Stop Depth.

Fig. 53  - Delayed Violation #1

Flashing

Flashing

Fig. 54  - Delayed Violation #2

Flashing

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands