manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 26

26

•  Press the Advance (Front) button to accept the setting and ad-

vance to Set Depth Alarm, or press and hold Both buttons for 2

seconds to revert to Surface Mode.

•  Unit reverts to Surface Mode in 2 minutes if no button is

pressed.

TO SET - MAX DEPTH ALARM 

(while in the Surface Mode)

Factory set for 330 feet, the Maximum Depth Alarm can be set to

values between 30 feet (3 meters) and 330 feet ( 99 meters) in in-

crements of 10 foot (3 meters).

•  Press Both buttons simultaneously, release when 

SET: 1

 ap-

pears.

•  Press and release  the Advance (Front) button, 

FO2

 appears

with the value flashing.

•  Press the Advance (Front) button 

1 more time.

•  The graphics 

MAX FEET

 and 

dEEP, 

and Alarm icon appear

with the 

Max Depth 

value flashing (Fig. 22).

•  Press and release the Select (Side) button until the desired

Alarm value appears, or press and hold the button to scroll

through the Set Points.

•  Press the Advance (Front) button to accept the setting and ad-

vance to Elapsed Dive Time Alarm, or press and hold Both but-

tons for 2 seconds to revert to Surface Mode.

•  Unit reverts to Surface Mode in 2 minutes if no button is

pressed.

Fig. 22 - Set Depth Alarm

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands