manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 80

80

Simulated Post Dive Surface Mode

•  The Simulator will enter Demo Surface Mode (Fig. 84) upon

ascending to 3 feet (1 meter) or shallower.

•  Press and hold the Select (Side) button for 4 seconds to access

Time Acceleration

.  The small time clock icon  begins flashing.

•  Press and release the Select (Side) button to increase Surface

Interval Time 1 minute per real time second.

•  Press and release the Select (Side) button during the Time Ac-

celeration to restore the normal time rate of 1 second per real

second.

•  Press and release the Advance (Front) button to access FO2 Set

Mode.  The FO2 graphic and value previously set will appear

with the value flashing.

•  Press and release the Select (Side) button to increase the FO2

value in increments of 1%.

•  Press and release the Advance (Front) button to accept the set-

ting and return to Demo Surface Mode.

•  Press and hold the Select (Side) button for  2 seconds to access

Dive Mode for a repetitive dive.  The DOWN Arrow will appear

flashing.

•  Pressing and holding Both buttons simultaneously for 2 seconds

will revert operation to real Surface Mode.

Fig. 84  - Demo Surface Mode

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands