Aeon AT56-69E, Service Manual, Page: 37 / 196

MAINTENANCE
2-27
NOTE:
The spring preload of the rear shock absorber can be
adjusted to suit the rider’s preference, weight, and
the riding conditions.
Standard position: 3
Minimum (Soft) position: 1_ Decrease Preload
Maximum (Hard) position: 5_ Increase Preload
Front Suspension Inspection
Compress and release front suspension. Damping should be
smooth throughout the range of travel. Inspect the front shocks
and springs to ensure proper function. If the shock is leaking
oil, replace it.
Check all front suspension components for wear or damage.
Check shock-mounting fasteners to ensure they are tight.
Inspect A-arm and weld elements for any sign of damage.
Lubrication / Grease Points
There are grease zerks on the upper and lower A-arms. Apply
grease until it is visible on the ends of the pivot points.
REAR SUSPENSION SPRING PRELOAD
ADJUSTMENT
The rear spring preload can be adjusted. To make preload
adjustments, rotate the adjustment cam clockwise to decrease
spring tension or counter-clockwise to increase spring tension.
Refer to “Front Suspension Spring Adjustment” for rear
suspension service procedures.
Rear Shock Standard position: 2
Minimum (Soft) position: 1_ Decrease Preload
Maximum (Hard) position: 5_ Increase Preload
Rear Suspension Inspection
Compress and release rear suspension. Damping should be
smooth throughout the range of travel. Inspect the rear shocks
and springs to ensure proper function. If the shock is leaking
oil, replace it.
Check all rear suspension components for wear or damage.
Check shock-mounting fasteners to ensure they are tight.
Inspect swing-arm and weld elements for any sign of damage.