Accu-Turn 1220, Operator'S Manual

Page: 50 / 96

50
ACCU 12
2
0
Operations
Operator’s Manual
5.4.2-7
5.4.2-8
5.4.2-9
Step 6:
Minimization completed (Figure 5.4.2-7):
•
Exit Minimization Mode.
Minimization to be continued (Figure 5.4.2-8):
•
Rotate the wheel until “888” is displayed.
•
Double mark the tire at the 12 o’clock position.
•
Remove the wheel from the unit.
•
Use a tire changer to rotate the tire so that the
double mark is in line with the valve.
•
Mount the wheel on the balancer.
•
Select the “F” key.
Step 7 (Figure 5.4.2-2):
•
Rotate the valve to the 12 o’clock position.
•
Select the “F” key.
Step 8 (Figure 5.4.2-3):
•
Spin the wheel.
Step 9 (Figure 5.4.2-9):
The unit will display the result:
- - -
Minimization successfully completed
EEE Minimization failed.
5.4.2 Weight Unit Toggle Mode.
Default weight setting: ounces.
Select this mode to change the unit of measurement
for the weight, before or after spinning the wheel.
•
Hold down the “ F ” key and press the “ Gr/Oz ” key.
Repeat the procedure to switch back to ounces.
5.4.3 Dimensions Unit Toggle Mode.
Default diameter and width unit of measurement:
inches.
•
Hold down the “ F ” key and press the “mm-inch”
key
Repeat the procedure to switch back to inches.