Accu-Turn 1220, Operator'S Manual

Page: 62 / 96

62
ACCU 12
2
0
Trouble shooting
Operator’s Manual
7 Trouble shooting.
If a problem with the wheel balancer appears, proceed
in the following order to solve the problem:
1. Rethink the last steps taken.
Did you work according to the manual?
Did the unit work as described and expected?
2. Check the unit according to the list in this chapter.
3. Call your local sales agent for technical service.
The set up of this chapter is:
Problem
1. Possible cause #1
•
Possible solution(s)
2. Possible cause #2
•
Possible solution(s)
When switched on, nothing lights up.
1. No power cable connected.
•
Connect power cable to the power outlet.
2. No mains current.
•
Check the current supply and the power system
fuses.
3. Unit fuse(s) blown.
•
Replace the unit fuse(s).
If the fuse(s) has (have) recently been substituted,
call the service team to check the unit.
When switched on, a beep is heard for 1 second.
1. Configuration error.
•
Call the Service team.
When switched on, the unit beeps with a certain
sequence.
•
Note down the sequence.
•
Call the Service team.
Display appears to freeze or lock up.
1. The unit may be in a program, waiting for a specific
action.
•
Finish the program currently in use.
•
Switch off the unit.
Wait for 20 seconds, switch on the unit.
Proceed.
2. Power to the balancer may have been interrupted.
•
Switch off the unit.
Wait for 20 seconds, switch on the unit.
Proceed.
•
If this happens frequently, have your power system
checked. If it is OK, call the Service team.
7 Trouble shooting.
If a problem with the wheel balancer occurs, proceed
in the following order to solve the problem:
1. Rethink the last steps taken.
Did you work according to the manual?
Did the unit work as described and expected?
2. Check the unit according to the list in this chapter.
3. Call ACCU (800-551-2228) for technical service if
required.
The format of this chapter is as follows:
Problem
1. Possible cause #1
•
Possible solution(s)
2. Possible cause #2
•
Possible solution(s)
When switched on, nothing lights up.
1. No power cable connected.
•
Connect power cable to the power outlet.
2. No current from power source.
•
Check the current supply and the power system
fuses.
3. Unit fuse(s) blown.
•
Replace the unit fuse(s).
If the fuse(s) has (have) recently been substituted,
call the service team to check the unit.
When switched on, a beep is heard for 1 second.
1. Configuration error.
•
Call ACCU Service.
When switched on, the unit beeps with a certain
sequence.
•
Note down the sequence.
•
Call ACCU Service.
Display appears to freeze or lock up.
1. The unit may be in a program, waiting for a specific
action.
•
Finish the program currently in use.
•
Switch off the unit.
Wait for 20 seconds, switch on the unit.
Proceed.
2. Power to the balancer may have been interrupted.
•
Switch off the unit.
Wait for 20 seconds, switch on the unit.
Proceed.
•
If this happens frequently, have your power system
checked. If it is OK, call ACCU Service.
Wheel does not spin automatically.
1. Lowering the switch guard does not activate a wheel
spin.
•
Check if the switch is mechanically activated by
lowering the guard.
2. Electrical malfunction.