ABB SCK, System Manual

Page: 81 / 244

42/23-81 EN Rev. 4 System Manual SCK Gas Sampling System 81
Danger Where / in what situa-
tion does the danger
arise?
Preventive action
Danger due to harm-
ful gases, jet flames Due to gases escaping
from the duct opening of
the rotary kiln
 Ensure adequate ventila-
tion of the work place.
 Only enter the danger area
around the retractor when
the shutter is closed.
 Lock the shutter before
commencing work, if this is
indicated.
 If work is unavoidable in the
area of the duct opening,
wear respiratory protection.
Risk of scalding due
to hot cooling water When working on the
cooling water system,
particularly:
 ventilation openings
 screw connections
 Do not perform work on the
cooling water circuit until
the gas sampling system
has cooled down.
Danger due to harm-
ful anti-freeze In the cooling water of
the cooling system
 Avoid contact with the
cooling water and the anti-
freeze.
 Wash any cooling water
and anti-freeze off the skin
immediately with water and
soap.
 If cooling water or anti-
freeze gets in the eyes de-
spite protective glasses,
rinse them thoroughly un-
der running water, holding
the eyelids open.
 Observe instructions in the
anti-freeze manufacturer's
safety data sheet.
Danger due to harm-
ful lubricating oil In the pneumatic box, on
the pneumatic motor
filter muffler, inside the
pneumatic motor.
 Avoid contact with lubricat-
ing oil.
 Wash any lubricating oil off
the skin immediately with
water and soap.
 If any lubricating oil gets in
the eyes despite protective
glasses, rinse them thor-
oughly under running water,
holding the eyelids open.
 Observe instructions in the
lubricating oil manufactur-
er's safety data sheet.
Danger due to harm-
ful dust While cleaning the gas
sampling system

Wear a dust mask.
 Wash any dust off the skin
immediately with water and
soap.