ABB SCK, System Manual

Page: 124 / 244

124 System Manual SCK Gas Sampling System 42/23-81 EN Rev. 4
Starting frequency converter and adapting control parameters
Risk of injury in the area of the gas sampling system due to moving or fall-
ing parts, hot surfaces, hot cooling water, anti-freeze, compressed air, lubri-
cating oil
Wear general personal protective equipment:
 Closed overalls with long trousers and long sleeves

Safety shoes

Safety gloves suitable for mechanical work
 Safety glasses
 Protective helmet

If necessary, additional protective equipment if prescribed by the operator.
Danger of electric shock when control cabinet is open, open connection or
terminal boxes
 Only specialized electrical personnel may work on the electrical system.
 Observe national regulations pertaining to electrical equipment.
The frequency converter ACS355 controls the heat exchanger motor. In order to
ensure constant cooling-water temperature, the factory-set default control parame-
ters must be adapted to the conditions at the installation site.
Refer to the ACS355 manual for further information on operating the frequency
converter.
 Control cabinet key to open the control cabinet
The following conditions must be met:
The service switch is in the
ON position; the gas sampling probe is retracted from
the kiln (see Operating the service switch on page 159).
Mechanical, thermal
and material dangers
Current-carrying
components
Meaning
Tools required
Requirements