![background image](http://html1.mh-extra.com/html/abb/acs800-07-0610-3/acs800-07-0610-3_hardware-manual_3428312115.webp)
Maintenance
109
Control and I/O cubicle cooling fans
The cooling fans inside the control and I/O cubicle can be replaced as follows:
1. Read and repeat the steps in section
Safety instructions
above.
2. Open the door of the control and I/O cubicle (or combined control, I/O and supply
cubicle).
3. Detach the wiring from each fan (AC plug and grounding wire).
4. Undo the four fastening screws of the fan assembly and pull the assembly
outwards to gain access to the fan fastening screws.
5. Undo the fastening screws of the fans (there are four for each fan) from below.
Remove the fans.
6. Install new fans in reverse order. Before fastening the fans, make sure the airflow
arrow on both fans is pointed up.
3
3
5
4
4
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Summary of Contents for ACS800-07-0610-3
Page 4: ...Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...
Page 7: ...Update Notice 3 Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...
Page 10: ...Update Notice 6 Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...