![background image](http://html1.mh-extra.com/html/abb/acs800-07-0610-3/acs800-07-0610-3_hardware-manual_3428312091.webp)
Electrical installation
85
Control connections
Drive control connections
The control connections are made on the terminal blocks provided in the swing-out
frame of the drive. Refer to the circuit diagrams delivered with the drive, and to the
chapter
Motor control and I/O board (RMIO)
.
Supply unit control connections
The supply unit is controlled using the local control devices mounted on the cabinet
door, or the buttons on the DSSB board. No external control connections by the user
are needed. However, the user can connect certain external devices to the supply
module. It is possible to:
• control the supply unit through the remote control inputs (On, Start, Reset,
External fault)
• halt the supply unit by an external emergency stop button (if the unit is equipped
with a local emergency stop button)
• read supply unit’s status information through the relay outputs (Fault, Running,
External 48 VDC supply on, Earth fault, emergency stop)
• feed the supply unit’s control boards from an ex48 VDC supply.
Refer to the circuit diagrams delivered with the drive for the connection terminals for
the external control devices. For additional information on the control connections
see the
ACA631/633 Cabinet-installed Diode Supply Unit (DSU) User’s Manual
(Code: 64735501 [English]), available through ABB representatives.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Summary of Contents for ACS800-07-0610-3
Page 4: ...Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...
Page 7: ...Update Notice 3 Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...
Page 10: ...Update Notice 6 Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...